You are here:Home » News » What are the characteristics of the extruded board produced by the carbon dioxide extruded board production line?
What are the characteristics of the extruded board produced by the carbon dioxide extruded board production line?
Views: 1 Author: Site Editor Publish Time: 2021-10-09 Origin: Site
What are the characteristics of the extruded board produced by the carbon dioxide extruded board production line?
Traditional extruded board production equipment uses freon as a foaming agent and polystyrene is mixed at high temperature to produce a foaming material. The carbon dioxide extruded board production line is an extruded board produced with carbon dioxide as the main blowing agent.
The reflective surface of the extruded board produced by the carbon dioxide extruded board production line is less than that of the ordinary extruded board, and the section is uneven and striped after being disconnected. The ordinary extruded board has more crystal reflective surfaces and neat cross-sections. After the two boards are pressed hard, both boards will sink, and the ordinary boards will also break. This shows that the skin of ordinary extruded board is brittle and thicker. The skin of the extruded board basically has no cells, and the heat preservation effect is poor, and it is easy to sink once it breaks. The extruded board produced by the carbon dioxide extruded board production line has low hand-feel hardness, thinner skin and better thermal insulation performance; the lower degree of sinking after pressing indicates that its cell stability is stronger.
XPS extruded board is a flame-retardant, waterproof and moisture-proof material, an environmentally friendly material, and can be used for a long time.
Our company is the first manufacturer in China to develop and produce automatic PVC gypsum ceiling production line. It has fully automatic production line（single-side lamination type and double side lamination type), semi-automatic production line and economic type for customers to choose. As the production line uses modular combination, we can give appropriate solution according to customer requirement and budget.
The production of MgO board adopts the wet plate rolling forming process, where the raw materials are measured and weighed through proportioning, mixed and stirred by a mixer (manually or automatically), and rolling forming. Primary curing, demolding and secondary curing in the curing room. Cutting and sanding, quality inspection and packaging. Complete the entire production system. The products are divided into: regular version of MgO board and MgO sanding board.
The mineral fiber board production line includes raw material mixing system, fourdrinier forming system and vacuum pump system, water cutting system, accelerating conveying system, lifting distribution system, board feeding system, drying system, hot air circulating system, board releasing system, board over-turning system, puttying system, small drying system I, coating system, small drying system II, embossing system, small drying system III, cutting system, dust collecting system, packing stacking system, control system.
Calcium silicate board as a new green environmental building materials except the traditional gypsum plate of features outside, it has superior fire performances and the resistance tide, sound insulation, fireproof waterproof heat insulation,light weight and so on. It also has the advantage of using long life. The new type of board is widely used in the building of ceiling smallpox and wall, family decoration and so on.
